JVC 1208YDR-YG-MD Power, Action, Display, Trouble, After the low, difficult to see, turns off when the, camcorder warms up, The LCD monitor is, FURTHER INFORMATION

FURTHER INFORMATION

Troubleshooting

Before requesting service, consult the following chart. If the solutions indicated in the chart do not solve the problem, consult your nearest JVC dealer or JVC service center for instructions.

Refer also to the FAQ of new products on JVC’s website.

The following phenomena are not malfunctions.•The camcorder heats up when it is used for a long time.•The battery heats up during charging.

•When playing back a video file, the image stops momentarily or the sound is interrupted at junctions between scenes.

•LCD monitor momentarily become red or black when sunlight is recorded.

•Black spots, or red, green, or blue spots appear on the LCD monitor. (The LCD monitor contains 99.99% effective pixels, but 0.01% of fewer pixels may be ineffective.)

ENGLISH

PowerDisplay

Trouble	Action
No power is supplied.	• Connect the AC adapter securely.
	• Recharge the battery pack.
After the low	• When the camcorder has warmed up after being cold, the
temperature message	camcorder may switch itself off to check it is operating correctly.
is displayed, the power	Turn on the camcorder again to start using it.
turns off when the
camcorder warms up.
	• Fully charge the battery pack, run it down, and then recharge it
The remaining battery	again.
	• If the camcorder is used for long periods of time in high or low
display is not correct.
	temperatures, or if the battery pack is repeatedly charged, the
	amount of remaining battery may not be displayed correctly.
The LCD monitor is	• The LCD monitor may be difficult to see if used in bright areas
difficult to see.	such as under direct sunlight.

FURTHER

INFORMATION

63