JVC 1208YDR-YG-MD work, etc), Action, itself, Trouble, monitor, Playback, too dark, Recording, performed, camcorder, too bright, interrupted, video/image, speed is slow

RecordingPlayback

Trouble	Action
Recording cannot be	• SD Card or Built-In Memory is full. Delete unnecessary files or
performed.	replace the SD Card.
	• Insert a commercially available SD card, and set each of the [REC
Recording stops by	MEDIA FOR VIDEO] to [SD Card] and [REC MEDIA FOR IMAGE] to
itself.	[SD].
	• Recording stops automatically after 12 hours of continuous recording.
	• Use backlight compensation.
The recorded subject is	• Set [GAIN UP] to [AGC] or [AUTO].
too dark.	• Use [NIGHT] from scene select.
	• Set the brightness to the [+] side.
The recorded subject is	• Set the brightness to the [–] side.
too bright.	• Set the backlight compensation to off if it is being used.
Digital zoom does not	• Change [ZOOM] to [80X/DIGITAL] or [800X/DIGITAL].
work.	• Digital zoom is not available in the still image recording mode.
The focus is not	• Wipe the lens with lens cleaning cloth.
adjusted automatically.	• If you are recording in a dark place or a subject that has no
	contrast between dark and light, adjust the focus manually.

•Set [WB] in [MANUAL SETTING] appropriately to the light source. The color looks strange. • Select [MWB] in [WB] while holding a sheet of plain white paper in

(Too bluish, too reddish, front of the camcorder so that the white paper fills the screen.

etc)Keep touching OK until the B indicator appears.

White balance setting	• This cannot be used if [SEPIA] or [MONOTONE] are selected as
cannot be activated.	effects.
	• Do not use [TWILIGHT] from scene select.
The continuous shooting	• The continuous shooting speed will drop after continuous shots.
	• Continuous shooting speed may drop depending on the recording
speed is slow.	media or under certain recording conditions.
Band of bright light	• This occurs when there is a bright light source near the camcorder.
appears on the LCD	This is not a malfunction. Change the direction of the camcorder to
monitor.	prevent the light source comes into view.
Sound or video are	• Sometimes playback is interrupted at the connecting section
interrupted.	between two scenes. This is not a malfunction.
	• Select [PLAYBACK MPG FILE] then search the video on the index
	screen.
	(Video files that have damaged management information can be
Cannot find a recorded	played back.)
video/image.	• Cancel group display and date search functions.
	• Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA
	FOR IMAGE]. (Files on other media are not displayed.)
	• Slide the mode switch to select the desired mode (! or #).
Some functions cannot	• The following functions cannot be used for a backup DVD.
be used when playing	When playing back video
back a backup DVD	- Search index by date
through a DVD burner	- Playback effects
connected to the	When playing back still image
camcorder.	- Playback effects

64