Cautions (Continued)Main Unit• For safety, DO NOT... open the camcorder’s chassis.... disassemble or modify the unit.... allow inflammables, water or metallic objects to enter the unit.

... remove the battery pack or disconnect the power supply while the power is on.

... leave the battery pack attached when the camcorder is not in use.... place naked flame sources, such as lighted candles, on the apparatus.... expose the apparatus to dripping or splashing.... leave dust or metal objects adhered to the power plug or an AC wall outlet.... insert any objects in the camcorder.• Avoid using the unit... in places subject to excessive humidity or dust.... in places subject to soot or steam such as near a cooking stove.

... near appliances generating strong magnetic or electric fields (speakers, broadcasting antennas, etc.).

... in places subject to extremely high (over 40°C) or extremely low (under 0°C) temperatures.

• DO NOT leave the unit... in places of over 50°C.

... in places where humidity is extremely low (below 35%) or extremely high (above 80%).

... in direct sunlight.... in a closed car in summer.... near a heater.

... in high places such as on a TV. Leaving the unit in high places while a cable is connected may result in a malfunction if the cable is caught and the unit falls onto the floor.

• To protect the unit, DO NOT... allow it to become wet.... drop the unit or strike it against hard objects.... subject it to shock or excessive vibration during transportation.... keep the lens directed at extremely bright objects for long periods.... expose the lens to direct sunlight.... swing it excessively when using the hand strap.

... swing the soft camcorder case excessively when the camcorder is inside it.

• To prevent the unit from dropping,• Fasten the grip belt securely.

• When using the camcorder with a tripod, attach the camcorder to the tripod securely.

If the camcorder drops, you may be injured and the camcorder may be damaged. When a child uses the unit, there must be parental guidance.

Declaration of ConformityModel Number: GZ-MS130UTrade Name: JVCResponsible party: JVC AMERICAS CORP.Address: 1700 Valley Road Wayne, N. J. 07470Telephone Number: 973-317-5000

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

72