14
AUTO CH MEMORY
CH SETUP
ADD / DELETE
CH LABEL
▲ / ▼ / ENTER / MENU / EXIT
TV CATV
AUTO CH MEMORY
CH SETUP
ADD / DELETE
CH LABEL
▲ / ▼ / / / MENU / EXIT
TV CATV
LANGUAGE / IDIOMA / LANGUE
CH SETUP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
▲ / ▼ / ENTER / MENU / EXIT
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into
the TV's memory. In addition to normal VHF and UHF
channels, this TV can receive up to 113 Cable TV chan-
nels. To use this TV with an antenna, set the TV/CATV
menu option to the TV setting. When shipped from the
factory, this menu option is in the CATV setting.

TV/CATV SELECTION

Press the MENU button.
Press the CH + (▲) or – (▼)
button until the indicator next to
“CH SETUP” begins to flash,
then press the ENTER button.
Press the CH + (▲) or – (▼)
button until the indicator next to
“TV/CATV” begins to flash.
Press the VOL + ( ) or – ( )
button to select the “TV” or
“CATV” mode. The arrow
indicates the selected mode.
Press the EXIT button.
NOTE: Contact your cable company to determine the
type of cable system used in your area.

AUTOMATIC CHANNEL MEMORY

Press the MENU button.
Press the CH + (▲) or – (▼)
button until the indicator next to
“CH SETUP” begins to flash,
then press the ENTER button.
Press the CH + (▲) or – (▼)
button until the indicator next to
“AUTO CH MEMORY” begins to
flash, then press the ENTER
button. The TV will begin
memorizing all the channels
available in your area.
Press the EXIT button.
1
2
3
4
5
1
2
3
4
LANGUAGE / IDIOMA / LANGUE
CH SETUP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
▲ / ▼ / ENTER / MENU / EXIT
AUTO CH MEMORY
CH SETUP
ADD / DELETE
CH LABEL
TV CATV
▲ / ▼ / ENTER / MENU / EXIT
ADD CH 012
0
-
9
/
▲
/
▼
/ / /
MENU
/ EXIT
LANGUAGE / IDIOMA / LANGUE
CH SETUP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
▲ / ▼ / ENTER / MENU / EXIT

TO ADD/DELETE CHANNELS

Press the MENU button.
Press the CH + (▲) or – (▼)
button until the indicator next to
“CH SETUP” begins to flash,
then press the ENTER button.
Press the CH + (▲) or – (▼)
button until the indicator next to
“ADD/DELETE” begins to flash,
then press the ENTER button.
Select the desired channels to
be added or deleted using the
10-key pad (0-9) or the CH + or
– button.
1
2
3
4
5Press the VOL + ( ) or – ( ) button to select “ADD” or
“DELETE”.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press the VOL + ( ) or
– ( ) button if you wish to ADD the unmemorized
channel. The channel indicator will change from red to
green when a channel is added and the channel will
be memorized. If a memorized channel was selected
(step 4), the channel indication will be green.
Press the VOL + ( ) or – ( ) button if you wish to
DELETE the channel from
memory. The channel indicator
will change from green to red
when a channel is deleted.
Repeat Steps 4 and 5 for each
channel to be added or deleted.
Press the EXIT button after adding or deleting all of
the desired channels, to return to normal TV viewing.
6