ENGLISH - 16 -

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press
AV button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in AV
mode.

Copy Facility

You can output the video and audio signals which inputs from
TV, EXT.1 (EXT-1) or EXT.3 (EXT-3) terminal to the video re-
corder connected to the EXT.2 (EXT-2) terminal.
 To select the output source, see Setting External Source
Output on page 10.

Connecting Headphones

Use the stereo headphone socket of your TV, to connect
headphones.
Tips

Care of the Screen

Clean the screen with a slightly damp, soft cloth. Do not use
abrasive solvents as they may damage the TV screen coat-
ing layer.

Poor Picture

Have you selected the correct TV system? Is your TV set or
house aerial located too close to the loudspeakers, non-
earthed audio equipment or neon lights, etc. ?
Mountains or high buildings can cause double pictures or
ghost images. Sometimes you can improve the picture quali-
ty by changing the direction of the aerial.
The picture quality may degrade when two peripherals are
connected to the TV at the same time. In such a case, dis-
connect one of the peripherals.

No Picture

Is the aerial connected properly? Are the plugs connected
tightly to the aerial socket? Is the aerial cable damaged? Are
suitable plugs used to connect the aerial? If you are in doubt,
consult your dealer.
No Picture means that your TV is not receiving any trans-
mission. Have you pressed the correct keys on the remote
control? Try once more.

Sound

Sound is coming from only one of the speakers. Is the bal-
ance set to one direction extreme? See SOUND menu.

Remote Control

Your TV no longer responds to the remote control. Perhaps
the batteries are exhausted. If so you can still use the local
buttons at the right side of your TV.
Have you selected the wrong menu? Press PICTURE but-
ton to return to TV mode or press MENU button to return to
the previous menu.

No solution

Switch your TV set off and on. If this does not work, call the
service personnel; never attempt to repair it yourself.
Specifications
TV BROADCASTING
PAL I
RECEIVING CHANNELS
VHF (BANDI/III)
UHF (BAND U)
HYPERBAND
CABLE-TV (S01-S41)
NUMBER OF PRESET CHANNELS
100
CHANNEL INDICATOR
ON SCREEN DISPLAY
RF AERIAL INPUT
75 Ohm Unbalanced
OPERATING VOLTAGE
220-240V AC, 50 Hz.
SOUND-MULTIPLEX SYSTEMS
Nicam Stereo
PICTURE TUBE
28 16:9
AUDIO OUTPUT POWER (WRMS.) (%10 THD)
2 x 10
POWER CONSUMPTION (W) (max)
145 Watt
DIMENSIONS (WxHxD) (mm)
ENG-2826W-AK45-1512UK-16-9-BSI-(AV-28F3SJ)-50056683.p65 15.09.2004, 11:0016