ENGLISH - 6 -
To cancel AUTO PROGRAM, press the PICTURE button.
You can delete a channel, insert a channel into a programme
number, or re-start AUTO PROGRAM with the PROGRAM
menu. For details, see PROGRAM (Programming) menu
on page 11.
4- If you do not have a T-V LINK compatible VCR, press
PICTURE button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, press   button to display T-V LINK
menu. Then follow the operating procedure Downloading
data to VCR in the following T-V LINK section.
If the message PLEASE CHECK ANTENNA CABLE AUTO.
PROGRAMMING SYSTEM does not appear, or if you want
to modify the settings later, you can do manually with the
FEATURE, INSTALL and PROGRAM menus.
For users in the UK:
If you have any problems setting up your new TV,
please call the JVC Helpline on 0870 330 5000.
For users in the Republic of Ireland:
If you have any problems setting up your new TV,
please contact your local JVC dealer.
T-V LINK
When a T-V LINK compatible VCR is connected to the EXT.2
Terminal on the TV, it is easier to set up the VCR and to view
videos. T-V LINK uses the following features:

To use T-V LINK functions:

A T-V LINK compatible VCR means a JVC video cassette
recorder with the T-V LINK logo, or with one of the following
logos. However, these VCRs may support some or all of the
features described earlier. For details, see your VCR instruc-
tion manual.
Q-LINK (a trademark of Panasonic Corporation)
Data Logic (a trademark of Metz Corporation)
Easy Link (a trademark of Phillips Corporation)
Megalogic (a trademark of Grundig Corporation)
SMARTLINK (a trademark of Sony Corporation)

Downloading data to VCR:

The VCR will automatically download the registered data on
the TV channels from the TV. This means you do not need to
set up the programme channels on your VCR manually.
The T-V LINK menu will be displayed when you press the
 button while PROGRAM menu is displayed, or when-
ever the INSTALL menu operations are performed.
Press   button to start downloading data to VCR.
 If you do not want to do, press the PICTURE button to
exit the menu.
When FEATURE NOT AVAILABLE... is displayed:
If FEATURE NOT AVAILABLE... is displayed, the download
was not performed correctly. Before trying to download again,
check that:
 The VCR power is turned on
 The VCR is T-V LINK compatible
 The VCR is connected to the EXT.2 terminal
 The SCART cable is fully wired.

Direct Rec:

What You See Is What You Record
You can easy record to VCR the images that you are watch-
ing on the TV. For details, read the manual for your VCR,
Use your VCR controls. You cannot carryout Direct Rec us-
ing your TVs control.
When the VCR is not ready (for example when there is no
tape inserted), NO RECORDING is displayed.
In the following situations, the VCR will stop recording if the
TV is turned off, if the TV channel or input is changed, or if
the menu is displayed on the TV:
 When recording images from an external device connected
to the TV. (For example a camcorder)
 When recording a TV channel after it has been un-
scrambled on a decoder.
 When recording a TV channel by using the TVs output be-
cause the VCRs own tuner cannot properly receive that
channel.

TV auto power on/VCR image view:

When the VCR starts playing, the TV automatically turns on
and the images from EXT.2 (EXT-2) terminal appear on the
screen.
ENG-2826W-AK45-1512UK-16-9-BSI-(AV-28F3SJ)-50056683.p65 15.09.2004, 11:006