ENGLISH - 10 -
 You can choose the ZOOM mode by pressing the ZOOM
(RED) button when no menu appears on the screen.
 The ZOOM mode may be automatically changed by the
control signal from an external device. When you want to
return the previous ZOOM mode, choose the ZOOM mode
again.
Adjusting the visible area of the picture:
If subtitles or the top (or bottom) of the picture are cut off,
you can adjust the visible area of the picture manually.
1. Press ZOOM button once.
The ZOOM mode indicator appears. The ZOOM mode will
not be changed.
2. While it is displayed, press   or   to change the
position of the picture.
 You cannot adjust the visible area in REGULAR or FULL
mode.
Feature Menu
 Press MENU button, now you are in main menu. In the
main menu, select FEATURE, using   or   button.
Then enter the feature menu pressing   or   button.

Sleep Timer:

The sleep timer is used to turn the TV off after a defined peri-
od. Press   or   button to choose a period of time after
selecting this item. The timer can be programmed between
Off and 120 minutes in steps of 10 minutes. (OFF, 010, 020,
030, 040, ......... ,120.)
If sleep timer is activated, at the end of the selected the time,
the TV goes automatically to stand-by mode.

Child lock:

You can disable the control panel buttons (except the POW-
ER button) with this item.
Press   or   button to change the setting to On or Off after
selecting this item.
When you set this item to On, the TV can be operated only
by using the remote control handset.
Warning: If Child Lock item is set to ON, the TV can not be
operated by VCR.

Language:

Menu Language can be selected by pressing   or   button
on Language item.

Setting External Source Output:

 You can use this menu to select the internal or external
source that will be output at EXT.2 terminal.
 In the FEATURE menu select EXT-2 OUTPUT using
 or   button. Then select the source you want to
be output at EXT.2 pressing   or   button (one of the
sources: TV, EXT-1, EXT-3 or EXT-4 (Front AV).

Blue Background During No-Signal:

The BLUE BACKGROUND feature can be set by   or 
button to either ON or OFF.
Install (Installation) Menu
You can store a channel manually, or modify the current set-
tings of a channel (for example, fine-tuning a channel).
You can also changing the colour system, or change the
DECODER(EXT-2) setting.
 Press MENU button to display the main menu.
 Press   or   button to select INSTALL item.
Then   or   button to display the INSTALL menu.
Note:
 If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on screen.
 In AV mode, you can change only the COLOUR SYSTEM
item.
ENG-2826W-AK45-1512UK-16-9-BSI-(AV-28F3SJ)-50056683.p65 15.09.2004, 11:0010