Tips
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.
Poor Picture
Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non- earthed audio equipment or neon lights, etc. ?
Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quali- ty by changing the direction of the aerial.
The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, dis- connect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving any trans- mission. Have you pressed the correct buttons on the remote control? Try once more.
Sound
Sound is coming from only one of the speakers. Is the bal- ance set to one direction extreme? See SOUND menu.
Remote Control
Your TV no longer responds to the remote control. Press the “PICTURE” button on the remote control once more. Perhaps the batteries are exhausted. If so you can still use the local buttons at the front of your TV.
Have you selected the wrong menu? Press “PICTURE” button to return to TV mode or press “MENU” button to return to the previous menu.
No solution
Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself.
Specifications
TV BROADCASTING
PAL SECAM B/G D/K L/L’
RECEIVING CHANNELS
VHF (BANDI/III)
UHF (BAND U)
HYPERBAND
L:
NUMBER OF PRESET CHANNELS
200
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
Nicam + German Stereo
PICTURE TUBE
29”
AUDIO OUTPUT POWER (WRMS.) (%10 THD)
2 x 10
POWER CONSUMPTION (W) (max)
140 Watt
DIMENSIONS: +',0(16,216(WxHxD)'(mm):HLJKW.J
ENGLISH - 32 -
