JVC AV-29ED5BN, AV-29ED5SN manual Menu System, Operating with the onset buttons, Picture Menu

•If you do not want to do, press the “PICTURE” button to exit the menu.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, check that:

•The VCR power is turned on

•The VCR is T-V LINK compatible

•The VCR is connected to the EXT.2 terminal

•The SCART cable is fully wired.

Direct Rec:

“What You See Is What You Record”

You can easy record to VCR the images that you are watch- ing on the TV. For details, read the manual for your VCR, Use your VCR controls. You cannot carryout Direct Rec using

your TV’s control9&57.￿9￿/LQN￿LV￿5HFRUGLQJ￿￿￿

When the VCR is not ready (for example when there is no tape inserted), “NO RECORDING” is displayed.

In the following situations, the VCR will stop recording if the TV is turned off, if the TV channel or input is changed, or if the menu is displayed on the TV:

•When recording images from an external device connected to the TV. (for example a camcorder)

•When recording a TV channel after it has been unscrambled on a decoder.

•When recording a TV channel by using the TV’s output be- cause the VCR’s own tuner cannot properly receive that channel.

TV auto power on/VCR image view:

When the VCR starts playing, the TV automatically turns on and the images from EXT.2 (EXT-2) terminal appear on the screen.

This function does not happen if your TV’s main power is turned off. Set your TV’s main power to on (standby mode).

Operating with the onset buttons

Volume setting and programme selection can be made using the buttons on the right side of the TV.

Volume Setting:

•Press “- ” button to decrease volume or “ +” button to increase volume, so a volume level scale will be displayed on the screen.

Programme Selecting:

•Press “P/Ch+” button to select next programme or “P/Ch-” button to select the previous programme.

Entering Main Menu:

•Press “MENU” button to enter main menu. In the main menu select submenu using “P/Ch+” or “P/Ch-” button and enter the submenu using “ +” or “- ” button. To learn the usage of the menus, refer to the Menu System section of this manual.

Operating with Remote Control

The remote control handset of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.

Functions which you can use out of menu system are de- scribed below.

Volume Setting:

Press “” button to increase volume.

Press “” button to decrease volume.

Programme Selecting (Previous or next programme):

•Press “” button to select the previous programme.

•Press ““ button to select the next programme.

Programme Selecting (direct access):

Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected program after a short delay.

•For a two or three digit program number enter the second or third digit after pressing the first digit within 2 seconds.

Menu System

Your TV has been designed with a menu system. Display “MENU” (main menu) and enter one of four menus (PICTURE, SOUND, INSTALL and FEATURE).

1- Press “MENU” button to display “MENU” (main menu). The menu titles will be displayed in the main menu.

2- Press “ “ or “ ” button to select a menu title, then press “” or “” button to enter the menu.

•To exit a menu, press “PICTURE” button.

•To go to the previous menu, press “MENU” button.

Picture Menu

To change picture settings:

•Press “MENU” button, now you are in main menu. In the

main menu, select PICTURE using ““ or “” button, then enter the picture menu pressing “” or “” button.

ENGLISH - 22 -