ENGLISH - 26 -
in turn is connected to the EXT.2 terminal. To use this item,
please see the
Using the Decoder (EXT-2) function on the following sec-
tion.
Store:
After the all settings are completed, store the new channels
setting to the programme number which you selected.
 Press   or   button to select Store, then press
 or   to store it.
Using the Decoder (EXT-2) function
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT.2 terminal, use
DECODER (EXT-2) to unscramble the scrambled TV chan-
nels.
1. Exit the menu.
2. Turn on the decoder power.
3. Display the scrambled TV channel on the TV. Even if the
decoder is working, a scrambled picture appears.
4. Display the INSTALL. menu again.
5. Press   or   button to select DECODER (EXT-2),
then press   or   button to set to ON
6. Press   or   to select STORE, then press   or
 button to store it. T-V LINK menu will appear after the
TV stores the setting.
7. Follow the operating procedure Downloading the data
to VCR on page 21 to transmit the revised programme
table data to the VCR.
 If you do not want to transmit, press PICTURE button
to exit the menu.
Note:
You can only use this item if you have a decoder connected
to a T-V LINK compatible VCR to EXT.2 terminal. Setting this
item to ON by mistake causes the picture/sound of a TV
channel you are currently viewing to disappear.
If this item has been set to ON but the TV channel cannot
be unscrambled, check the following:
 Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
 Can the TV channel be unscrambled with a decoder?
 Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.

Program Menu:

You can use the PROGRAM menu to change a programme
number, delete a channel.
 Press   or   button to select PROGRAM item.
 Press   or   button to enter the PROGRAM menu.
To choose a channel in the PROGRAM menu:
Press   /  /   /   button.
The colour of the programme number that you choose is
changed in the PROGRAM menu and you can view the pic-
ture of that channel.
Caution:
Using DELETE or CHANGE item rewrite the current chan-
nel list in the PROGRAM menu. Therefore, the programme
numbers of some of channels will change.
When you complete the settings of PROGRAM menu:
If you have a T-V LINK compatible VCR, press the   but-
ton to display the T-V LINK menu. Then follow the operating
procedure Downloading the data to VCR on page 21 to
transmit the Programme table data to the VCR.
If you do not have a T-V LINK compatible VCR, press PIC-
TURE button to exit the menu.
To change a programme number (CHANGE):
1. Select a channel that you want to change its programme
number.
2. Press Blue button to enter the CHANGE mode.
3. Press   /  /   /   button to select the pro-
gramme number that you want to change the programme
number of the selected channel to.
4. Press Blue button. Two channels of the selected program-
me numbers will be exchanged.
To delete a channel (DELETE):
1. Select a channel that you want to delete.
2. Press Red button to delete it.
02-ENG-2929-AK52-3D-C86SUK-4-3-(AV-29ED5BN&SN)-50066129.p65 26.04.2005, 08:3426