JVC AV-29ED5BN, AV-29ED5SN Preparation, Switching the TV ON/OFF, Before Switching on your TV

Preparation	• Replace the battery cover.
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. To prevent any fault and unsafe situations, please do
not place any objects on top of the set.
“Use this apparatus in tropical and moderate climates.”
Features
• It is a remote controlled colour television.
• 200 programmes from VHF, UHF bands or cable channels
can be preset.	NOTE: Remove batteries from remote control handset when it is
• It can tune cable channels.
	not to be used for a long period. Otherwise it can be damaged
• Controlling the TV is very easy by its menu driven system.
	due to any leakage of batteries.
• It has two Euroconnector sockets for external devices (such	Switching the TV ON/OFF
as video recorder, video games, audio set, etc.)
• Front AV (EXT-3) Input available.	You can operate your TV either using the remote control
• Stereo sound systems (German+Nicam) are available.	handset or directly using the TV onset buttons.
• 3D Sound (3-Dimensional Sound).	To switch the TV on
• Full function Teletext (Fastext, Toptext).
	Your TV will switch on in two steps:
• It is possible to connect headphone.
	1- Press the power button located on the front of the TV. Then
• Direct channel access.
	the TV switches itself to standby mode and the RED LED
• A.P.S. (Automatic Programming System).	located below the TV turns on.
• All programmes can be named.	2- To switch on the TV from stand-by mode either:
• Forward or backward automatic tuning.	Press a digit button on the remote control so that a program-
• Sleep timer.	me number is selected,
	or,
• Child Lock.
	Press Standby / Power Button or Programme Up and Down
• Blue Background.
	buttons on the TV or on the remote control respectively, so
• Comb Filter : Digital circuitry to make adjustments providing
	the TV will switch on and the RED Led will turn GREEN.
outstanding picture quality with sharp, crisp edges, while vir-	IMPORTANT:
tually eliminating dot crawl.
• CTI : (Colour Transient Improvement) Improvement of hori-	• If no aerial signal is received at the selected program for a
zontal transitions of chrominance (colour) signals.	period of 5 minutes then your TV automatically switches
• T-V Link.	into stand-by mode.
• Automatic sound mute when no transmission.	To switch the TV off
• When no valid signal is detected, after 5 minutes the TV	• Press the stand-by button on the remote control, so the TV
switches itself automatically to stand-by mode.
	will switch to stand-by mode and the GREEN LED will be-
• WSS (Wide Screen Signaling).
	come RED, or,
• NTSC Playback.	• Press the power button located on the front of the TV.
Before Switching on your TV	NOTE: If you have switched of the TV set from the power but-
	ton instead of the remote control, next time you press the
Power connection	power button, the TV set will switch on without going to the
Important: The TV set is designed to operate on 220-240 V	stand-by mode.
AC, 50 Hz.	Initial Settings
• After unpacking, allow the TV set to reach the ambient room
	When the TV is first turned on. It enters the initial setting
temperature before you connect the set to the mains.
	mode, and the AUTOSTORE menu is displayed. Follow the
Aerial Connections
	instructions below to/&do$28175<RQWLQXH1*8the$*(initial￿￿￿￿￿￿￿￿￿￿settings.
• Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect the external equipments
See “Connect the External Equipments” on page 31.
• See the instruction manuals provided with the external de-
vices too.
Inserting batteries in the remote control handset
• Remove the battery cover located on the back of the hand-
set by gently pulling upwards from the indicated part.
• Insert two AAA (R03) or equivalent type batteries inside.

ENGLISH - 20 -