The Clock is the heart of all timer
functions. You must set the clock
before the On/Off Timer will work.
To SETCLOCK
To operate
To set the hour (AM/PM)
To move to minutes
To set the minutes
To move to START CLOCK
when done with settings
To start the clock
If you want to synchronize the TV
clock with another clock or time signal,
press LEFT or RIGHT MENU arrow at the
appropriate time, and the clock will start.
Note: If the TV is unplugged or you
experience a power outage,
you must reset the clock for
any timer functions to work.
CLOCK SET MESSAG E S :
If you do not set the clock but attempt
to use the On/Off Timer anyway, you
will get the following message:
To YES/NO
Choose YES
If you choose NO, you will receive
the following message:
Note: If you attempt to “Start Clock”
without setting the time you
will receive this message:
Once you have set up the items in
the Plug In Menu you must select
Finish. Finish tells the TV that you
have selected your personal
default options for the menu and
clock, and unless there is a power
interruption, the Plug In Menu will
not show up again.
To FINISH
To exit and save settings
Note: You can reset the options
available in Plug In Menu via the
regular JVC menu system:
❒Language is found in the Initial
Setup Menu.
❒Auto Tuner Setup is found in the
Initial Setup Menu.
❒Tuner Mode is found in the Initial
Setup Menu.
❒Set Clock is found in the
Clock/Timers Menu.
T I M E ––:–– ––
S TART CLOCK
T I M E ––:–– ––
S TART CLOCK
THANK YOU ! !
INCORRECT TIME
PLEASE TRY AGA I N
POWER INTERRUPTED
WOULD YOU SET CLOCK
FIRST ?
Y E S
NO
YOU CANNOT OPERAT E
ON/OFF TIMER !
1

6 PLUG IN MENU

NOTES:
Remember, the
Plug In Menu will
only appear after
you turn on the TV
for the first time, or
after a power
interruption.
Continued from below…
Continued above…