JVC manual 33

SET UP menu

„ID LIST

You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name.

1Press the 5or 6buttons to choose an EXT terminal

2Press the blue button to display the name list (ID LIST)

EXT SETTING
EXT-1			ID LIST
	DUBBING		VHS
EXT-3		EXT-2	S-VHS
			DVC
			SAT
EXT-4			STB
TV	TV	OK
D0021-EN

3Press the 6buttons to choose a name. Then press the abutton

The ID LIST disappears and the name is assigned to the EXT terminal.

•You cannot assign an EXT terminal name not found in the name list (ID LIST).

To erase a name assigned to the EXT terminal:

Choose a blank space.

4Press the abutton to complete the setting

„DUBBING

You can choose a signal source to be output from the EXT-2 terminal.

You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing.

1Press the 5buttons to choose the arrow from the menu

EXT SETTING

EXT-1

DUBBING

EXT-3EXT-2

EXT-4

TV TV OK

D0022-EN

2Press the 6buttons to choose an EXT terminal or TV. Then press the abutton

The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.

TV:

The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.

•During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal.

•When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal.

•The RGB signals from TV games cannot be output. Teletext programmes cannot be output.

33