Additional menu operations
Using the ACI function
This TV has an ACI function which decodes the ACI (automatic Channel Installation) data.
Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly according to the data from the cable TV station.
Caution
•If your cable TV station broadcasts ACI data and if “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu, the ACI function is enabled. In all other cases, it is disabled.
1Press the 6 buttons to choose ACI START. Then press the a button to start the ACI function
When you don’t want to use the ACI function:
Press the 6 buttons to choose ACI SKIP and then press the abutton.
If the AUTO PROGRAM menu changes to another menu:
Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV station.
Follow the menu indications and use the 5 and 6 buttons to operate the menu. After you have made the setting, press the abutton.
If “ACI ERROR” is displayed in the AUTO PROGRAM menu:
“ACI ERROR” denotes that the ACI function is not working properly. Press the abutton to start the ACI function again.
If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3 button to start the AUTO PROGRAM function. It does not cause any problem because all the TV channels are registered to the Programme numbers (PR) by the AUTO PROGRAM function.
2When the settings are completed, the EDIT menu is displayed. Return to the instructions that you were reading before, and continue the operation
When the “Initial settings” has been made:
Return to step 6 of “Initial settings” on page 6.
When the “AUTO PROGRAM” has been made:
Return to step 4 of “AUTO PROGRAM” on page 31.
•If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.
•When the cable TV broadcast reception is poor, the ACI function will not work properly.
•If there is an error in the ACI data itself, the TV channel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function. Alternatively, use the EDIT/ MANUAL function to correct the Programme number (PR) setting.
36
