JVC AV-32X4BA manual Dubbing, To erase a name assigned to the EXT terminal, Arrow from the menu

EXT SETTING

3Press the 6 buttons to choose a name. Then press the abutton

The ID LIST disappears and the name is assigned to the EXT terminal.

•You cannot assign an EXT terminal name not found in the name list (ID LIST).

To erase a name assigned to the EXT terminal:

Choose a blank space.

4Press the abutton to complete the setting

DUBBING

You can choose a signal source to be output from an EXT-2 terminal.

You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.

	EXTSETTING1
1 Press the 5 buttons to choose
		EXT-4	EXT-2
the arrow from the menu
		3	DUBBING
TV		TVBACK
		OK
D0022-EN

2Press the 6buttons to choose an EXT terminal or TV.

Then press the abutton

The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.

TV:

The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.

•During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal.

•When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal.

•The RGB signals from the TV games cannot be output. Teletext programmes cannot be output.

26