JVC AV28S2EI, AV32S2EI, AV32S2EI, AV28S2EI 2WKHU#PHQXV, 8VLQJ#WKH#&25#+705,##, Ixqfwlrq

2WKHU#PHQXV

■'RZQORDGLQJ#GDWD#WR#D#9&5

You can send to the latest programme numbers (PR) data to a VCR with the T-V LINK function.

∙You can only do this when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

∙This only works when the T-V LINK menu is being displayed.

4Press the ë buttons to choose FEATURES. Then press the 3 button.

The FEATURES menu appears.

1Turn on the VCR

2Press the 3 button

The data transmission begins.

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu changes over to another menu:

The TV has finished its menu. This new menu is opperated from the VCR. See the VCR instruction manual for what to do next.

∙If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu, check the following three items. Then press the 3 button to retry data transmission.

−Has a T-V LINK compatible VCR been connected to the EXT-2 terminal?

−Has the VCR power been turned on?

−Does the SCART cable that connects the EXT-2 terminal to the T-V LINK compatible VCR have all its proper connections?

■8VLQJ#WKH#'(&2'(5#+(;705,##

IXQFWLRQ

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the decoder power

2Display the scrambled TV channel on the

TV

Even if the decoder is working, a scrambled picture appears.

3Press the 3 button to display the MENU

The MENU (main menu) appears.

5Press the ë buttons to choose DECODER (EXT-2) . Then press the ì buttons to choose ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the ì buttons to choose OFF.

6Press the 3 button to complete the setting

The T-V LINK menu appears.

7Follow “Downloading data to a VCR” on page 30 to transmit the programme number (PR) data to the VCR

8If you have another TV channel you want to unscramble using a decoder, repeat steps 2 to 7.

∙If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

−Has the decoder been connected to the VCR properly according to the VCR and decoder instruction manuals?

−Has the decoder power been turned on?

−Can the TV channel be unscrambled with a decoder?

−Do you need to change the VCR settings in order to connect the decoder? Confirm that the VCR is set properly by rechecking the VCR Instruction manual.

63