Connections
Connecting to a DVD player
Illustration of
1)Connect Green cable out from DVDplayer “Y”Component Output, in toTV“Y”Component Input.
2)Connect Blue cable out from DVDplayer “PB”Component Output, in to TV“PB”Component Input.
3)Connect Red cable out from DVDPlayer “PR”Component Output, in to TV“PR” Component Input.
4)Connect White Audio cable out from DVDLeft Audio Output, in to TV Left Audio Input 2.
5)Connect Red Audio cable out from DVDRight Audio Output, in to TV Right Audio Input 2.
•Green, blue and red are the most common colors for DVD cables. Some models may vary colors, please consult the user’s manual for your DVDPlayer for more information.
•Be careful not to confuse the red DVDcable with the red audio cable. It is best to complete one set of connections (DVDor Audio Output) before starting the other to avoid accidentally switching the cables.
•See page 20 for instructions on programming your remote control to operate the basic functions of your DVD player.
•If you use Input 2
V2
•NOTE: Progressive DVDPlayers (players with an output scan of 31.5 KHz) will not work properly with this television.
14