JVC AV 36D202 manual Quick Setup, Getting Started, Step One - The Remote Control, Basic Operation

Models: AV 36D502 AV 36D202 AV 32D202 AV 27D502 AV 32D302 AV 32D502 AV 36D302

1 52
Download 52 pages 17.56 Kb
Page 7
Image 7
Quick Setup 1

Quick Setup 1

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. This information includes basic instructions on operating your remote control, making a simple cable/antenna and optional VCR connection and, finally, information on programming your television's AutoTuner.

If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.

Step One - The Remote Control

The remote control is the key to operating your television's many great features. Before you can operate your remote control, you first need to install the batteries (included).

Slide the cover on the back of the remote down towards the bottom of the remote control. Insert two batteries (included) carefully noting the “+” and “–” markings, placing the “–” end in the unit first. Slide the cover back into place.

Basic Operation

Turn the television on and off by pressing the POWER button at the top right corner of the remote.

Power Button

Key Feature Buttons

The four key feature buttons at the center of the remote can be used for basic operation of the television. The top and bottom buttons will scan forward and back through the available channels. The right and left buttons will turn the volume up or down. These buttons are also marked with four arrows and are also used with JVC's onscreen menu system.You will need to use these buttons later in the Quick Setup.

The next step is to connect your television to an antenna or cable.

Proceed to Step Two Getting Started

7

Page 7
Image 7
JVC AV 36D202, AV 36D502, AV 36D302, AV 32D302 Quick Setup, Getting Started, Step One - The Remote Control, Basic Operation