Remote Programming
VCR Codes
The remote control is programmed with VCR codes for power on/off, play, stop,
1)Find the VCR brand from the list of codes shown below.
2)Slide the first
3)Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad.
4)Release the DISPLAY button, and confirm the operation of the VCR.
•If your VCR does not respond to the first code, try the others listed. If it does not respond to any of the codes, try the search codes function on page 25.
•After you program your remote, some VCR buttons may not work properly. If so, use the VCR’s remote.
•To record, hold down the REC button on the remote and press PLAY.
23
