Remote Programming

Search Codes

Cable/Satellite Search Codes Function

1)Slide the first 2-Way Mode Selector switch to CATV.

2)Press and hold down the POWER button, then press the RETURN+/TV button for more than three seconds.

3)Release the RETURN+/TV button, then release the POWER button.

4)Press the POWER button on the remote, and see if the cable or satellite box responds.

5)If there was a response, press RETURN+/TV. The codes are now set. If there was no response, repeat Step 4. If you repeat Step 4 a total of 80 times without a response, use the remote control that came with your equipment.

6)Press RETURN+/TV to exit.

VCR/DVD Search Codes Function

1)Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or “DVD”.

2)Press and hold down the VCR or DVD POWER button, then press the RETURN+/TV button for more than three seconds.

3)Release the RETURN+/TV button, then release the VCR or DVD POWER button.

4)Press the VCR or DVD POWER button, and see if the VCR or DVD responds.

5)If there was a response, press RETURN+/TV. The codes are now set. If there was no response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (40 times for the DVD player), and there is no response, use the remote control that came with your equipment.

6)Press RETURN+/TV to exit.

25

Page 25
Image 25
JVC AV 32DF74, AV 36DF74 manual Cable/Satellite Search Codes Function, VCR/DVD Search Codes Function