MENU SCREEN | – Contents of the menus – (continued) | ||
SYSTEM Menu (continued) |
| ||
Items | Setting |
| Contents |
INDEX WRITE | OFF | Use this setting to enable/disable index signal recording. | |
| ON | OFF | : No recording of index signal. |
|
| ON | : Use this setting to record index signals. An index signal is |
|
|
| automatically registered at the position where recording |
|
|
| starts. |
REMOTE menu
The REMOTE menu consists of 2 menus. (1/2 and 2/2 menu)
REMOTE (1/2) menu
Items | Setting | Contents |
REMOTE | OFF | Use this menu item to enable/disable the REMOTE SEL. switch on |
| ON | the front panel. |
|
| OFF : Disables the 9 PIN/SERIAL setting of the REMOTE SEL. |
REPEAT MODE | OFF |
| INDEX |
| VIDEO OUT |
| TAPE END |
Use this setting to enable/disable repeat playback. | |
OFF | : No repeat playback |
INDEX | : Repeat playback between the positions where in- |
| dex signals are recorded. |
VIDEO END | : Repeat playback from the beginning of the tape to |
| the position where recording of video signals ends. |
TAPE END | : Repeat playback from the beginning to the end of |
| the tape. |
|
| switch. | |
|
| ON : Enables the 9 PIN/SERIAL setting of the REMOTE SEL. | |
|
| switch. Use this setting when remote controlling the unit via | |
|
| the 9 PIN and SERIAL terminal. | |
LOCAL | NO KEY | Use this to select the buttons on the main unit to be rendered oper- | |
FUNCTION | EJECT | able when remote controlling the unit via the 9 PIN REMOTE ter- | |
| STP + EJT | minal or the SERIAL REMOTE terminal. | |
| ALL KEYS | NO KEY | : No button enabled. |
NEXT PAGE | Display the SYSTEM (2/2) menu. |
PAGE BACK | Return to the TOP MENU. |
SYSTEM (2/2) menu
Items | Setting |
| Contents |
DC IN MODE | OPE OFF | Select the action to perform when power is supplied via the DC IN | |
| OPE ON | terminal. |
|
| PLAY | OPE OFF | : Sets the unit to OPERATE OFF |
|
| OPE ON | : Sets the unit to OPERATE ON. |
|
| PLAY | : If a tape has been inserted, the VTR will go into the |
|
| PLAY mode. (AUTO PLAY) |
OPERATION | OFF | Turn ON/OFF the OPERATION LOCK. |
LOCK | ON | OFF : Turns off the OPERATION LOCK and enables the buttons |
|
| on the main unit. |
|
| ON : VTR goes into the OPERATE LOCK mode. The buttons and |
|
| the slide switch on the main unit are inhibited. However, |
|
| OPERATE ON and menu operations are still possible. |
|
| Memo |
|
| Even when this setting is OFF, disabling the buttons on the main |
|
| unit while it is controlled via a remote controller connected to the 9 |
|
| PIN REMOTE or SERIAL REMOTE terminal is possible, by setting |
|
| the LOCAL FUNCTION item of the REMOTE menu. |
PAGE BACK |
| Return to the SYSTEM (1/2). |
|
| EJECT | : Only the EJECT button enabled. |
|
| STP + EJT : Only the STOP button and the EJECT button are ena- | |
|
|
| bled. |
|
| ALL KEYS : All operation buttons are enabled. | |
|
| Memo |
|
|
| If the OPERATION LOCK item of the SYSTEM (2/2) menu is set | |
|
| as ON, the buttons on the main unit will be disabled regardless of | |
|
| the setting here. | |
PREROLL | 3SEC | When remote controlling the unit via the 9 PIN REMOTE terminal, | |
| 5SEC | use this item to set the PREROLL time of the unit. Configurations | |
| 7SEC | done via the editing remote controller prevail over other settings. | |
| 10SE | 3SEC | : 3 seconds |
|
| 5SEC | : 5 seconds |
|
| 7SEC | : 7 seconds |
|
| 10SEC | : 10 seconds |
|
| Memo |
|
|
| To enhance editing precision, please set it to at least 7 seconds. | |
REM FF/REW | FF/REW | Use this menu item to set the action to be performed when an FF/ | |
MODE | SEARCH | REW command is received via the 9 PIN REMOTE terminal or DV | |
|
| terminal. |
|
|
| FF/REW | : Sets the unit to execute FF/REW when a command is |
|
|
| received. This is the usual setting. |
|
| SEARCH : Sets the unit to go into the SEARCH state when a | |
|
|
| command is received. Use this setting if the locate(cue |
|
|
| up) function does not work well. |
58
59
