20 B U T T O N F U N C T I O N S
NOTES :
NUMBER BUTTONS 10 KEY PAD
Press two of the number buttons to move to single and double digit channels.
To move to Channel 7:
0 (zero)
7 (seven)
100 + BUTTON
The 100+ button accesses all channels above Channel 99.
To move to Channel 124:
100+
2 (two)
4 (four)
RETURN+
There are two kinds of Return…
Return+ — Set a “Return Channel” to return to after scanning with CHANNEL
RETURN+ and hold for 3 seconds
RETURN CHANNEL
PROGRAMMED !
Scan with CHANNEL
RETURN+
Note: To cancel a Return channel, press and hold Return+ for another 3 seconds until “RETURN CHANNEL CANCELLED!” appears.
Return — Return to the last channel viewed after moving to another channel via the 10 key pad.
RETURN+
MUTING
The MUTING button turns the sound off completely when you press it.
MUTING
The sound will turn off completely.
Note: To return the the original volume press MUTING again.
MENU BUTTON
The MENU buttons allow you to access the onscreen menu system. You then use the CHANNEL
Move to another channel with the 10 key pad.
RETURN+
VCR BUTTONS
Note: The remote is preset with the code 000 to control a JVC VCR. For any other brand, you must set up the manufacturer’s code (page 11).
TV / VIDEO
TV/VIDEO selects the input mode.
TV/VIDEO
TV VIDEO