G E T T I N G S T A R T E D 9
POWER
❒Press the POWER button on the remote control or the TV front panel. The power lamp will glow red. (On the
❒Make sure that the TV/CATV switch is set to TV
❒To turn the power off, press the POWER button again. The power lamp will go out.
❒The On Timer lamp will glow red when the On/Off Timer is set, even when the TV power is off.
ADJUSTING VOLUME
1Use the VOLUME
VOLUME 13
2Press the MUTING button to instantly turn the volume off to zero. To restore the volume to the previous volume level, simply press the MUTING button again.
CHANGING CHANNELS
110 key direct access.
Press the numbers on the remote’s 10 key pad. For
2CHANNEL –/+ button ( ).
Press the CHANNEL
❒NOTE: After you operate the Auto Tuner Setup (page 13), all of the blank, or empty, channels will be removed from scanning so that there is no noise or channel snow when you scan, only active channels.
3Regular Return.
Press and release the RETURN+ button to return to the previous channel. First, select a channel (game #1). Then, select another channel (game #2) with the 10 key pad and push the RETURN+ button to flip directly back and forth.
4Return+ .
Press and hold down the RETURN+ button for three seconds. The message, “RETURN CHANNEL PROGRAMMED !” will appear and you can scan as you wish with the CHANNEL
To cancel the Return+ channel, press and hold down the RETURN+ button for another three seconds and the message, “RETURN CHANNEL CANCELLED !” appears.
❒Pressing any number key or turning the TV off will also cancel a Return+ channel.