JVC CA-HXZ3 manual When selecting “TUNER FM” or “TUNERAM”, When selecting “1 CD--1”, volume level

English

4 Set the off-time you want the unit to turn off (on standby) at.

1)Turn 4 / ¢ to set the hour, then press

SET/DISPLAY.

“SET” appears for 1 second.

2)Turn 4 / ¢ to set the minute, then press

SET/DISPLAY.

“SET” appears for 1 second, then the unit enters source selecting mode.

D A I L Y

5 Turn 4 / ¢ to select the source to play, then press SET/DISPLAY.

“SET” appears for 1 second.

• The source changes as follows:

TUNER FM TUNER AM

AUX IN TAPE 1 CD -- 1

TUNER FM: tunes in to a specified preset FM station.

=Go to step 6.

TUNER AM: tunes in to a specified preset AM station.

= Go to step 6.

1CD-- 1: plays from a specified track of a specified disc. = Go to step 6.

TAPE: plays a tape in the cassette deck.

=Go to step 7.

AUX IN: plays an external source. = Go to step 7.

6 When selecting “TUNER FM” or “TUNERAM”

Turn 4 / ¢ to select the preset station number, then press SET/DISPLAY.

The unit enters volume setting mode.

When selecting “1 CD-- 1”

1)Turn 4 / ¢ to select the disc number, then press

SET/DISPLAY.

“SET” appears for 1 second.

2)Turn 4 / ¢ to set the track number, then press

SET/DISPLAY.

“SET” appears for 1 second, then the unit enters volume setting mode.

7 Turn 4 / ¢ to set the	PRESET
volume level.

• The volume level changes as follows:

VOLUME – – VOLUME 5

VOLUME 15 VOLUME 10

D A I L Y

•If you select “VOLUME – –,” the volume is set to the last level when the unit has been turned off.

8 Press SET/DISPLAY to complete	SET /
	DISPLAY
the Daily Timer setting.

The DAILY (Daily Timer) indicator stops flashing and remains lit. “OK ” appears on the display for 2 seconds.

The settings you have done are shown on the display in sequence for your confirmation.

9 Press to turn off the unit (on standby) if you have set the Daily Timer with the unit turned on.

•If the unit is turned on before the on-time comes Daily Timer does not work.

•Even if you unplug the AC power cord or if a power failure occurs

Once you set the timer, the timer setting may remain stored in memory in a few days. In this case, check whether the timer setting still remains or not.

To turn on or off Daily Timer after its setting is done

1 Press CLOCK/TIMER repeatedly until	/ TIMER
	CLOCK

“DAILY” appears on the display.

The DAILY (Daily Timer) indicator starts flashing on the display and(Timer) indicator remains lit.

2 To turn off the Daily Timer, press CANCEL / DEMO

CANCEL/DEMO.

The DAILY (Daily Timer) and(Timer) indicators go off from the display (“DAILY OFF” appears for a while).

The Daily Timer is canceled, but the setting for the Daily Timer remains in memory.

Or
To turn on the Daily Timer, press	DISPLAY
	SET /
SET/DISPLAY.
“OK ” appears on the display for 2 seconds.
The settings you have done are shown on the
display in sequence for your confirmation.

– 27 –