To set whether to print a protocol monitor report, which helps you identify the cause of a communication problem.
Values:
Print Always Prints a protocol monitor report after every fax transmission.
Print On Error Prints a protocol monitor report only when an error occurs.
Print Disable* Does not print a protocol monitor report after a fax transmission.
Country
Purpose:
To select the country where the printer is used.
System Settings
Use the System Settings menu to configure to configure a variety of printer features.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Power Saver Timer
Purpose:
To specify the time for transition to power saver mode.
Options:
Mode 1 | 5min* | Specifies the time taken by the printer before it |
|
| enters the power saver timer mode 1 after it finishes |
| ||
| a job. | |
|
| |
|
|
|
Mode 2 | 6min* | Specifies the time taken by the printer before it |
|
| enters the power saver timer mode 2 after it goes into |
| ||
| the power saver mode 1. | |
|
| |
|
|
|
Enter 5 in Mode 1 to put the printer in the power saver timer mode five minutes after it finishes a job. This uses less energy, but requires more warm- up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you notice lights flickering.
Understanding the Printer Menus
