Dell 1355cnw, 1355CN manual 352

Receive	Telephone	Automatic fax reception is turned off. You can receive
Mode		a fax by picking up the handset of the external
		telephone, pressing the remote receive code, and then
		pressing	.
	Fax*	Automatically receives faxes.
	Telephone/Fa	When the printer receives an incoming fax, the

xexternal telephone rings for the time specified in Auto Rec Fax/Tel, and then the printer automatically receives a fax. If an incoming call is not a fax, the printer beeps from the internal speaker indicating that the call is a telephone call.

	Ans	The printer can share a telephone line with an
	Machine/Fax	answering machine. In this mode, the printer will
		monitor the fax signal and pick up the line if there are
		fax tones. If the phone communication is using serial
		transmission in your country (such as Germany,
		Sweden, Denmark, Austria, Belgium, Italy, France and
		Switzerland), this mode is not supported.
	DRPD	Before using the Distinctive Ring Pattern Detection
		(DRPD) option, a distinctive ring service must be
		installed on your telephone line by the telephone
		company. After the telephone company has provided a
		separate number for faxing with a distinctive ring
		pattern, configure the fax setup to monitor for that
		specific ring pattern.
Auto Rec Fax	0*	Sets the interval at which the printer goes into the fax
		receive mode after receiving an incoming call.
	0–255
Auto Rec	6*	Sets the interval at which the printer goes into the fax
Fax/Tel		receive mode after the external telephone receives an
	0–255
		incoming call.
Auto Rec	21*	Sets the interval at which the printer goes into the fax
Ans/Fax		receive mode after the external answering machine
	0–255
		receives an incoming call.

352

Understanding the Tool Box Menus