IPv4 Get IP | AutoIP* | Automatically sets the IP address. | ||
| Address |
|
| |
BOOTP | Uses BOOTP to set the IP address. | |||
|
| |||
|
|
|
| |
|
| RARP | Uses RARP to set the IP address. | |
|
|
|
| |
|
| DHCP | Uses DHCP to set the IP address. | |
|
|
|
| |
|
| Panel | Enables the IP address entered on the operator | |
|
|
| panel. | |
|
|
|
| |
| IP Address |
| Manually sets the IP address allocated to the printer. | |
|
|
| ||
| Subnet Mask | Manually sets the subnet mask. | ||
|
|
| ||
| Gateway Address | Manually sets the gateway address. | ||
|
|
|
| |
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on.
Values:
LPD | Disable | Disables the LPD port. |
|
|
|
| Enable* | Enables the Line Printer Daemon (LPD) port. |
|
|
|
Port9100 | Disable | Disables the Port9100 port. |
|
|
|
| Enable* | Enables the Port9100 port. |
|
|
|
WSD | Disable | Disables the WSD port. |
|
|
|
| Enable* | Enables the WSD port. |
|
|
|
SNMP | Disable | Disables the SNMP UDP port. |
|
|
|
| Enable* | Enables the Simple Network Management Protocol |
|
| (SNMP) UDP port. |
|
|
|
Disable | Disables the | |
|
|
|
| Enable* | Enables the |
|
|
|
EWS | Disable | Disables an access to Dell Printer Configuration |
|
| Web Tool embedded in the printer. |
|
|
|
| Enable* | Enables an access to Dell Printer Configuration |
|
| Web Tool embedded in the printer. |
380
Understanding the Printer Menus
