Dell 1355CN, 1355cnw Margin Top/Bottom

Copying 247
2 Press the (Copy) button.
3 Press the button until Multiple-Up is highlighted, and then press
the button.
4 Press the button to select the desired setting, and then press the
button.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
5 If necessary, customize the copy settings including the number of copies,
contrast, and image quality. See "Setting Copy Options" on page238.
6 Press the (Start) button to begin copying.
When you are using the document glass and
Multiple-Up is set to
Auto , ID Copy , or Manual , the display prompts you for another page.
Press the button to select
Yes or No , and then press the button.
7 If you select Yes , press the button to select Continue or Cancel ,
and then press the button.
Margin Top/Bottom
To specify the top and bottom margins of the copy.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
Off* Does not perform multiple-up printing.
Auto Automatically reduces the original pages to fit onto one
sheet of paper.
ID Copy Prints the original pages onto one sheet of paper in the
original size.
Manual Prints the original pages onto the one sheet of paper in
the size specified in Reduce/Enlarge.