Tone* | Sets the dialing type to Tone. | |
Pulse(10PPS) | Sets the dialing type to Pulse | (10 pulse per second). |
|
|
|
Pulse(20PPS) | Sets the dialing type to Pulse | (20 pulse per second). |
|
|
|
Resend Delay
Purpose:
To specify the interval between transmission attempts within the range of 3 to 255 seconds. The default is 8 seconds.
Redial Attempts
Purpose:
To specify the number of redial attempts to make when the destination fax number is busy, within the range of 0 to 9. If you enter 0, the printer will not redial. The default is 3.
Redial Delay
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is 1 minute.
Junk Fax Setup
Purpose:
To reject faxes sent from unwanted numbers by accepting faxes only from the fax numbers registered in the Phone Book.
Off* | Does not reject faxes sent from unwanted numbers. |
|
|
On | Rejects faxes sent from unwanted numbers. |
|
|
NOTE: Ensure to specify Fax Number before using Junk Fax Setup.
Remote Receive
Purpose:
384
Understanding the Printer Menus
