Shooting without Disturbing Others (Silent Mode)

The Silent mode automatically disables flash, mutes operation tones, and configures other settings to avoid disturbing others around you. It comes in handy when shooting in a museum or other areas where flash photograph is prohibited.

1.In the REC mode, press [SET].

2.Use [] and [] to select the sixth Control Panel option from the top (Silent Mode).

3.Use [] and [] to select “On” and then press [SET].

This enters the Silent mode, which is indicated by (Silent) on the monitor screen. The following shows the camera setup in the Silent mode.

FlashOffSelf-timer OffSoundsOff

•As shown in the example to the right, Flash and Self-timer are not included in the control panel. This means that these settings cannot be changed from the Control Panel.

•See the following for details.

–Flash (page 37)

–Self-timer (page 39)

–Sounds (page 87)

•Entering the Silent mode in the REC mode will also enter the Silent mode in the PLAY mode automatically (page 69).

Using the Simple Mode

The Simple mode eliminates troublesome setups and simplifies taking photos. This mode is recommended for those who are new to digital photography.

1.In the REC mode, press [SET].

2.Use [] and [] to select the third option from the bottom in the Control Panel (Simple Mode).

3.Use [] and [] to select “ ” and then press [SET].

This enters the Simple mode.

41