HP p550 manual Adding Audio to a Photo Voice Memo, To play photo audio

Adding Audio to a Photo (Voice Memo)

Procedure

[ ] (PLAY) Photo Screen [SET] MENU PLAY Tab Voice Memo

You can add audio to a photo after you shoot it. You can re-record a photo’s audio whenever you want. You can record up to about 30 seconds of audio for a single photo.

1.Press [SET] to start audio recording.

Remaining recording time

2.Press [SET] again to stop audio recording.

•Take care that you do not block the camera’s microphone with your fingers while recording.

•Good recording results are not possible when the camera is too far away from what you are trying to record.

•	Your camera supports the following audio data formats.				Microphone
	– Audio Format: WAV extension
•	You cannot add audio to a photo that is protected.
•	To delete audio, perform the following operation:
	Voice Memo	Delete	[SET]	[ ] (Delete).

IMPORTANT!

•Note that you cannot restore the original audio of an Audio Snapshot after you delete or re-record it.

To play photo audio

1.In the PLAY mode, use [ ] and [ ] to scroll through the photos until the Audio Photos you want is displayed.

An audio photo is one that has a icon.

2.Press [ ] (Video) to start playback.

72