To charge using a USB connection to a computer

The battery loaded in the camera is charged whenever the camera is connected directly to a computer with the USB cable.

Depending on the setup of your computer, you may not be able to charge the camera’s battery over a USB connection. If this happens, use of the USB adapter that comes with the camera is recommended.

1.Power off the camera.

Check to make sure that the camera’s monitor screen is blank. If it isn’t, press [ON/OFF] (Power) to turn off the camera.

[ON/OFF] (Power)

Monitor screen

IMPORTANT!

The first time you connect the camera to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

17

Page 18
Image 18
HP p550 manual To charge using a USB connection to a computer