Powering the Camera On and Off

To turn power on

To turn on power

This feature is not enabled by default.

and enter the

Refer to page 93 for details.

REC mode

Press [ON/OFF] (Power) or [ ] (REC).

 

• The back lamp will light green

 

momentarily and the lens will

 

extend out of the camera (page 27).

To turn on power This feature is not enabled by default.

and enter the

Refer to page 93 for details.

PLAY mode

Press [ ] (PLAY).

The back lamp will light green momentarily and a photo or video currently stored in camera memory will appear on the monitor screen (page 29).

[ON/OFF] (Power)

Back lamp

[ ] (PLAY)

[ ] (REC)

Take care to ensure that nothing is restricting or coming into contact with the lens as it extends. Holding the lens with your hand so it cannot extend creates the risk of malfunction.

Pressing [ ] (PLAY) while in the REC mode switches

to the PLAY mode. The lens retracts about 10 seconds after switching modes.

The LCD Save and Power Saving (pages 92) will turn off power automatically if you do not perform any operation for a preset amount of time.

To power off the camera

Press [ON/OFF] (Power).

You can configure the camera so power does not turn on when you press [ ] (REC) or [ ] (PLAY). You also can configure the camera to turn off when you press [ ] (REC) or [ ] (PLAY) (page 93).

25

Page 26
Image 26
HP p550 manual Powering the Camera On and Off, To turn power on, To power off the camera