Using Flash (Flash)
1.In the REC mode, press [ 
] ( 
) once.
2.Use [ 
] and [ 
] to select the flash setting you want and then press [SET].
•If there are no indicators on the monitor screen, you can cycle through the flash
modes by pressing [ 
] ( ). You can turn display information on or off by pressing [
] (DISP) (page 12).
Flash
[
] (
)
|
| Auto Flash | Flash fires automatically in accordance with exposure |
|
| ||
|
| (amount of light and brightness) conditions. | |
|
|
| |
|
|
|
|
|
| Forced Off | Flash does not fire. |
|
|
Flash always fires. This setting can be used to brighten a 
Forced On subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
|
| Red Eye | Flash fires automatically. This type of flash can be used to |
| Reduction | reduce the chance of redness in the subject’s eyes. | |
3.Press the shutter button to shoot.
indicates the flash will fire.
Back lamp
Flashes orange while the flash is charging to indicate that photo recording is disabled.
•You will not be able to take another flash photo until the lamp stops flashing orange, which indicates that charging is complete.
37
