First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not fully charged. Perform the steps below to load the battery into the camera and charge it.
•Use only the provided battery or type of battery and charger that came with your camera. Using other types of battery or charger may damage the equipment and invalidate the warranty.
To load the battery
1.Open the battery cover.
Slide the battery cover slider towards OPEN and then open it as indicated by the arrows in the illustration.
2.Load the battery.
1
2
Stopper
Insert the battery into the compartment with the terminal facing inside the camera with correct orientation as shown. Press the battery in until the stopper secures it in place.
3.Close the battery cover.
Close the battery cover and then shift the slider towards LOCK.
•For information about how to replace the battery, see page 3.
2
1
15
