Configuring USB Protocol Settings (USB)
Procedure
[SET] MENU Set Up Tab USB
You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device.
Mass | Select this setting when connecting to a computer (pages 80, 81). | |
With this setting, the computer sees the camera as an external | ||
Storage | storage device. Use this setting for normal transfer of images from | |
| the camera to a computer. | |
PTP | Select this setting when connecting to a printer that supports | |
PictBridge (page 75). This setting simplifies the transfer of Photo | ||
(PictBridge) | ||
files to the connected device. | ||
| ||
|
|
Selecting the Screen Aspect Ratio and Video Output System (TV Out)
Procedure
[SET] MENU Set Up Tab TV Out
You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC | Video system used in Japan, the U.S., and other countries |
PAL | Video system used in Europe and other areas |
|
|
4:3 | Normal TV screen aspect ratio |
16:9 | Wide screen aspect ratio |
|
|
•Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. Photos will not display correctly if you select the wrong aspect ratio.
•Photos will not display correctly unless the camera’s video signal output setting matches the video signal system of the TV or other video equipment.
•Photos cannot be displayed correctly on a TV or video equipment that is not NTSC or PAL.
94