2Press the 
(Copy) button.
3Press the 
(Color Mode) button to select the desired color mode.
4Press the 
(Start) button to begin copying.
Collated
To sort the copy output: For example, if you make two copies of three page documents, one complete three page document will print followed by the second complete document.
NOTE: Copying documents with a large amount of data may exhaust available memory.
If a memory shortage occurs, cancel the collating by turning Collated to Uncollated on the operator panel.
1Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 296.
2Press the 
(Copy) button.
3Ensure that Collated is highlighted, and then press the 
button.
4Press the 
button to select the desired setting, and then press the 
button.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Uncollated* | Does not sort the copy job |
|
|
Collated | Sorts the copy job |
Copying
