•
•Operator Panel
•Dell Printer Configuration Web Tool
Ethernet Cable
1Select Ethernet Cable, and then click Next.
2Follow the instructions, and then click Next.
The Advanced Configuration Tool screen appears.
3Select the printer to be configured in the Select Printer screen, and then click Next.
NOTE: If the printer to be configured is not listed in the Select Printer screen, try the following steps:
•Click Refresh to update the information.
•Click Enter IP Address, and then enter the IP address of your printer.
4 Enter the SSID.
5 Select Type of wireless network.
6 Configure the security setting, and then click Next. The IP Address Settings screen appears.
7Select IP Mode depending on your network scheme. When IPv4 is selected:
Configure the following:
90
aSelect Type.
bEnter the following items:
•IP address of your printer
•Subnet Mask
•Gateway Address
When IPv6 is selected:
Configure the following:
aSelect Use Manual Address.
bEnter IP address of your printer.
Installing Printer Drivers on Computers Running Windows