*1 | Enter 5 in Sleep to put the printer in the Sleep mode five minutes after it finishes a job. |
| This uses less energy, but requires more |
| printer shares an electrical circuit with room lighting and you notice lights flickering. |
| Select a high value if your printer is in constant use. In most circumstances, this |
| keeps the printer ready to operate with minimum |
| between 5 and 30 minutes for the power saver timer mode if you want a balance |
| between energy consumption and a shorter |
| The printer automatically returns to the standby mode from the Sleep mode when it |
| receives data from the computer. You can also return the printer to the standby mode |
| by pressing any button on the operator panel. |
*2 | If more than 20 jobs are in the queue, the job history may be cleared. |
*3 | The default for mm/inch varies depending on |
|
|
Date & Time
Purpose:
To set the date and time, and regional time zone of the printer.
Values:
Date Format | Specifies the date format; yy/mm/dd, mm/dd/yy, or |
| dd/mm/yy. |
|
|
Time Format | Specifies the time format; 24H or 12H. |
|
|
Time Zone | Specifies the time zone. |
|
|
Set Date | Specifies the current date. |
|
|
Set Time | Specifies the current time. |
|
|
Apply New Settings | After you complete the settings, press the Apply New |
| Settings button to apply the changes. |
|
|
Paper Density
Purpose:
To specify the paper density.
Values:
Plain | Normal* | Specifies the paper density of plain paper. |
|
|
|
| Light |
|
336
Understanding the Tool Box Menus
