The cursor is located at the first three digits of the IP address.
12Enter the value of the IP address using the numeric keypad.
13Press the 
button.
The next three digits are highlighted.
14Repeat step 12 and step 13 to enter all of the digits in the IP address, and then press the 
button.
15Ensure that IP Address is highlighted.
16Press the 
button until Subnet Mask is highlighted, and then press the 
button.
The cursor is located at the first three digits of the subnet mask.
17Enter the value of the subnet mask using the numeric keypad.
18Press the 
button.
The next three digits are highlighted.
19Repeat step 17 and step 18 to set subnet mask, and then press the button.
20Press the 
button and ensure that Subnet Mask is highlighted.
21Press the 
button until Gateway Address is highlighted, and then press the 
button.
The cursor is located at the first three digits of the gateway address.
22Enter the value of the gateway address using the numeric keypad.
23Press the 
button.
The next three digits are highlighted.
24Repeat step 22 and step 23 to set gateway address, and then press the button.
25Turn off and turn on the printer.
The Tool Box
NOTE: When you use IPv6 Mode for network printing, the Tool Box cannot be used to assign an IP address.
Setting the IP Address
55
