Dell 1355CN, 1355cnw manual 177

Trap	Trap Address Type	Select the trap address type from the list.
Notification		Selecting Off clears the settings in Trap Address,
1-4		Port Number, and Notify, and does not notify
		trap occurrence. Selecting IPv4 or IPv6 allows
		you to enter Trap Address.
	Trap Address	Specifies the IP address and IP socket in the
		following format:
		• IPv4
		Specifies the IP address and IP socket in the
		nnn.nnn.nnn.nnn:mmmmm format. Each
		section of "nnn" is a variable value between 0
		and 255. Note that values 127 and 224-254 are
		not valid for the first three-digits only. IP socket
		mmmmm is a variable value between 0 and
		65535.
		• IPv6
		Specifies the IP address and IP socket in the
		xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm
		mm format. Each section of "xxxx" is a
		hexadecimal variable value between 0 and ffff.
		IP socket mmmmm is a variable value between 0
		and 65535.
	Trap Notification Enter the SNMP trap destination port number.
	(IP) Port Number
	Notify	Specifies whether to notify trap occurrence.
Authenticate Error Trap		Specifies whether to notify Authenticate Error
		Trap.

Scan to PC

Purpose:

To specify the client when scanning data.

Values:

FTP Client	Connection	Sets the connection time-out period from 1 to 60
	Time-Out	seconds.
	FTP Passive	Sets whether to enable the FTP Passive mode.

Dell Printer Configuration Web Tool

177