Dell 1355CN, 1355cnw Reduce/Enlarge

240 Copying
5 If necessary, customize the copy settings including the number of copies,
contrast, and image quality. See "Setting Copy Options" on page238.
6 Press the (Start) button to begin copying.
Reduce/Enlarge
To reduce or enlarge the size of a copied image, from 25 percent to 400
percent when you copy original documents from the document glass or ADF.
NOTE: When you make a reduced copy, black lines may appear at the bottom of
your copy.
NOTE: This item is available only when Multiple-Up is set to Off or
Manual.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page296.
2 Press the (Copy) button.
3 Press the button until Reduce/Enlarge is highlighted, and then
press the button.
4 Press the button to select the desired settings, and then press the
button.
mm series
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Auto Automatically determines which output mode for the copy job
200%
A5A4 (141%)
A5B5 (122%)
100%*