NOTE: When multiple printer drivers are installed on your computer, the Select Printer window opens. In this case, click the name of Dell 1355cnw Color MFP listed in Printer Name.
The Tool Box opens.
2Select TCP/IP Settings from the list on the left side of the page. The TCP/IP Settings page appears.
If the IP address shows 0.0.0.0 (the factory default) or 169.254.xx.xx, an IP address has not been assigned. To assign one for your printer, see "Assigning an IP Address (for IPv4 Mode)" on page 53.
Disabling the firewall before installing your printer
NOTE: For Windows XP, Service Pack 2 or 3 must be installed.
If you are running one of the following operating systems, you must disable the firewall before installing the Dell printer software:
• Windows 7
• Windows Vista
• Windows Server 2008 R2
• Windows Server 2008
• Windows XP
1 Click Start→ Help and Support.
NOTE: For Windows Server 2008 R2 and Windows 7 operating systems, if you use Online Help, switch to Offline Help on Windows Help and Support window.
2In the Search box, type firewall and then press Enter.
In the list, click Turn Windows Firewall on or off and then follow the instructions on the screen.
Enable the firewall after the installation of the Dell printer software is complete.
Inserting the Drivers and Utility CD
1Insert the Drivers and Utilities CD into your computer to start Easy Setup Navigator.
70
Installing Printer Drivers on Computers Running Windows