2Press the 
(Copy) button.
3Press the 
button until Margin Top/Bottom is highlighted, and then press the 
button.
4Press the 
or 
button or enter the desired value using the numeric keypad, and then press the 
button.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
4 mm*/0.2 Specify the value in increments of 1 mm/0.1 inch. inch*
0-50 mm/0.0-
2.0 inch
5Press the 
(Start) button to begin copying.
Margin Left/Right
To specify the left and right margins of the copy.
1Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 296.
2Press the 
(Copy) button.
3Press the 
button until Margin Left/Right is highlighted, and then press the 
button.
4Press the 
or 
button or enter the desired value using the numeric keypad, and then press the 
button.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
248
Copying
