302 Faxing

Automatic Redialing

If the number you have dialed is busy or there is no answer when you send a
fax, the printer will automatically redial the number every minute based on
the number set in the redial settings.
To change the time interval between redials and the number of redial
attempts, see "Available Fax Settings Options" on page291.
NOTE: The printer will not automatically redial a number that was busy when the
number was manually entered.
Sending a Delayed Fax
The Delayed Start mode can be used to save scanned documents for
transmission at a specified time in order to take advantage of lower long
distance rates.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page296.
2
Press the
(Fax)
button.
3
Adjust the document resolution to suit your fax needs. For more
information, see "Resolution" on page 298.
If you need to change the contrast, see "Lighter/Darker" on page299.
4
Press the button until
Delayed Start
is highlighted, and then
press the button.
5
Press the button until
On
is highlighted, and then press the
button.
6
Enter the start time using the numeric keypad or press the or
button to select the start time, and then press the button.
7
Press the button until
Fax to
is highlighted, and then press the
button.
8
Ensure that
Keypad
is highlighted, and then press the button.