Fax Settings
Purpose:
To configure the basic fax settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Values:
Receive Mode | Telephone | Automatic fax reception is turned off. You can |
|
| receive a fax by picking up the handset of the |
|
| external telephone, pressing the remote receive code, |
|
| and then pressing . |
|
|
|
| Fax* | Automatically receives faxes. |
|
|
|
| Telephone/ | When the printer receives an incoming fax, the |
| Fax | external telephone rings for the time specified in |
|
| Auto Receive Fax/Tel, and then the printer |
|
| automatically receives a fax. If an incoming call is not |
|
| a fax, the printer beeps from the internal speaker |
|
| indicating that the call is a telephone call. |
|
|
|
| Answer | The printer can share a telephone line with an |
| Machine/ | answering machine. In this mode, the printer will |
| Fax | monitor the fax signal and pick up the line if there |
|
| are fax tones. If the phone communication is using |
|
| serial transmission in your country (such as Germany, |
|
| Sweden, Denmark, Austria, Belgium, Italy, France |
|
| and Switzerland), this mode is not supported. |
|
|
|
| DRPD | Before using the Distinctive Ring Pattern Detection |
|
| (DRPD) option, a distinctive ring service must be |
|
| installed on your telephone line by the telephone |
|
| company. After the telephone company has provided |
|
| a separate number for faxing with a distinctive ring |
|
| pattern, configure the fax setup to monitor for that |
|
| specific ring pattern. |
Auto Receive Fax Sets the interval at which the printer goes into the fax receive mode after receiving an incoming call.
Auto Receive | Sets the interval at which the printer goes into the fax receive |
Tel/Fax | mode after the external telephone receives an incoming call. |
Dell Printer Configuration Web Tool
