JVC CA-MD70R manual Tuning in a Preset Station, To erase a preset station

3 Select a preset number. On the unit:

Rotate MULTI JOG, or press < or > of the tuner control buttons.

On the remote control:

Press @or #of the tuner control buttons.

•You can also use the number buttons. (Make sure that you have pressed FM/AM on the remote control before pressing the Number buttons.)

For preset number 5, press 5.

For preset number 15, press +10 then 5. For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

4 Press SET again.

The tuned station in step 1 is stored in the preset number selected in step 3.

•Storing a new station on a used number erases the previously stored one.

AM

FM

Tuning in a Preset Station

1 Press FM/AM.

The unit automatically turns on and tunes in the previously tuned station (either FM or AM).

•Each time you press the button, the band alternates between FM and AM.

2 Select a preset number. On the unit:

Rotate MULTI JOG, or press < or > of the tuner control buttons.

On the remote control:

Press @or #of the tuner control buttons.

•You can also use the number buttons. (Make sure that you have pressed FM/AM on the remote control before pressing the Number buttons.)

For preset number 5, press 5.

For preset number 15, press +10 then 5. For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

English

“MEMORY” does not appear if you press SET on the remote control.

When you unplug the AC power cord or if a power failure occurs

The preset stations will be erased in a few days. If this happens, preset the stations again.

To erase a preset station

The following procedure is only possible on the unit.

1Select a preset station number you want to erase.

2Press CANCEL.

The preset number starts flashing in the main display.

3Press SET.

“CANCEL” appears in the main display, and the station frequency stored in the preset number is erased.

– 14 –