JVC CA-MD70R manual Press the button for the next character you want to input

2)Press the button for the next character you want to input.

•If the next character you want to input is assigned to the same button you have just pressed in step 6-1), press flfirst to move the character entry position to right.

7 Repeat steps 5 and 6 to input other characters.

•The main display can only show 8 characters at a time. If you enter the 9th character, the first character disappears, and so on.

8 Press ENTER twice to finish the title entry.

•If you want to cancel the editing, press MD TITLE INPUT after pressing ENTER once in this step.

9 Press 0on the unit to eject the MD.

“WRITING” appears while the editing you have made is being recorded on the MD.

You can assign titles during play or recording

•During play: Entering a track title

The MD recorder repeats playback of the current track until you press ENTER twice in step 8 above. When you press it twice, MD stops play.

Entering a disc title

The MD recorder repeats playback of all tracks of the MD until you press ENTER twice in step 8 above. When you press it twice, MD stops play.

•During recording: Entering a track title

The MD recorder continues recording even after you press ENTER twice in step 8 above. When you press it twice, a track title is assigned to the track where you have started the title entry.

Name!!

Changing the Title

You can make a correction or change the title.

1 Follow steps 1 to 4 of page 41.

2 Press ¿or flto select the character you want to correct.

•Make sure that the character you want to change is flashing.

3 Press CANCEL to delete the character you have selected in the above step.

4 Input the correct character by pressing one of the text entry buttons.

5 Repeat steps 2 to 4 of the current procedure to correct more characters.

6 Press ENTER twice to finish correcting the title.

•If you want to cancel the correction, press MD TITLE INPUT after pressing ENTER once in this step.

7 Press 0on the unit to eject the MD.

“WRITING” appears while the editing you have made is being recorded on the MD.

To erase all the characters

Press CANCEL repeatedly in step 3 above to erase all the characters, then go to step 6.

English

Available Characters

Capital letters Small letters Numerals Symbols

(Blank)

– 42 –