JVC CA-MD70R manual Divide Function, Insert an MD you want to edit into the MD loading slot

English

Continued

Amplifier/tuner

MD EDIT CANCEL SET ENTER MULTI JOG

MD recorder

MD IN lamp MD Loading slot 0

DIVIDE Function

This function allows you to divide one track into two separate tracks. It is useful, for example, when you want to add track marks at a certain point within a track or if you want to separate a recording.

•To do the following procedures, use the buttons and controls on the unit.

•To stop any time during editing process, press MD EDIT.

1 Insert an MD you want to edit into the MD loading slot.

The MD IN lamp lights.

2 Press MD EDIT.

The MD recorder enters editing mode (with DIVIDE function selected).

3 Press SET.

The information of the first track (or the current track, if during play) of the MD appears in the main display, and playback starts.

4 Rotate MULTI JOG to select the track you want to divide.

Ex. When you want to divide track 3

•If you have selected a wrong track, press CANCEL then select the correct track.

5 Press SET when you find the point where you want to divide the track.

The MD recorder repeats the selected point — a portion of 3 seconds length following the dividing point.

•If the dividing point is satisfactory, go to step 7.

•If the dividing point is not satisfactory, go to the next step

6 Rotate MULTI JOG to precisely adjust the dividing point.

•You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds from the original point (Position 0).

When you stop rotating the MULTI JOG dial, the unit repeats the newly selected dividing point.

• When you find the right position, go to the next step.

– 33 –