English
Surround modes *:
D.CLUB: Increases resonance and bass.
HALL: Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an outdoor stadium.
SEA (Sound Effect Amplifier) modes:
ROCK: Boosts low and high frequency. Good for acoustic music.
POP: Good for vocal music.
CLASSIC: Good for classical music.
Manual modes:
MANUAL 1/2/3:
Your individual mode stored in memory. See “Creating Your Own Sound Mode — Manual Mode.”
OFF: Cancels the sound mode.
*Surround elements are added to the SEA elements to create a
When one of these modes is selected, the SOUND MODE indicator lights up as — 
When one of the SEA modes including manual modes (SEA elements without surround elements) is selected,
it lights up as — 
Creating Your Own Sound Mode — Manual Mode
You can change SEA patterns to suit your preference. These changed settings can be stored in the MANUAL 1, 2, and 3 modes.
•There is a time limit for performing the following steps. If the setting is canceled before you finish, start from step 1 again.
•If you want to add the surround elements to your SEA pattern, select one of the surround modes (D.CLUB, HALL, or STADIUM) before starting the procedure below.
On the unit ONLY:
1 Press and hold SEA CONTROL until “SEA CONT” appears on the display.
Current level appears.
2 Adjust the SEA pattern. |
|
|
|
|
|
|
| |
1) | Press 4 or ¢ to select the |
|
|
|
|
|
|
|
| frequency range to adjust |
| PREV |
| NEXT |
| ||
|
|
|
| |||||
| (LOW, MID, HIGH). |
|
|
|
|
|
|
|
2) | Press 1 or ¡ to adjust the |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| level |
|
|
|
|
|
|
|
| frequency range. |
|
|
|
|
|
|
|
3)Repeat steps 1) and 2) to
adjust the level of the other frequency ranges.
3 Press SEA CONTROL again.
4 Press 4 or ¢ to select one of the
MANUAL 1, 2, and 3 modes into which you want to store the SEA pattern.
5 Press SEA CONTROL again.
The SOUND MODE indicator also lights up.
The SEA pattern you have created is stored into the MANUAL mode selected in the above step.
To use your own sound mode
Select MANUAL 1, 2, or 3 mode when using the sound modes. See “Selecting the Sound Modes.”
– 11 –
